Practical Aspects of Solvent Extraction - Columnist Ron Majors discusses some of the practical considerations in the successful application of the popular yet age-old technique of solvent extraction (
FindAnalytichem Custom Search
About Search
Practical Aspects of Solvent Extraction
Columnist Ron Majors discusses some of the practical considerations in the successful application of the popular yet age-old technique of solvent extraction (also known as liquid–liquid extraction, or LLE). After a brief review of the basics, guidelines on the selection of the appropriate extraction solvents and how to use acid–base equilibria to ensure efficient extractions of ionic and ionizable compounds are provided. Problems in LLE and the solutions to these problems are highlighted. A..
Feb 1, 2009
By: Ronald E. Majors
The Application Notebook

123456
Next ť


Ronald E. Majors
Recently, I had the opportunity to participate in Colacro XII, a chromatography symposium held in a Latin America country every two years. This year's meeting was held in Florianopolous, Brazil, October 27-30. During the symposium, I perused the large number of applications posters for the sample preparation techniques being used. I was surprised to find many of the investigations of such diverse matrices as natural products, fruits and vegetables, petroleum products, and body fluids used solvent extraction (liquid–liquid extraction, or LLE) as the initial (or the only) sample preparation technique. So, I thought that I would devote an installment of "Sample Prep Perspectives" to this well used technique. In our last comprehensive sample preparation survey, nearly 40% of the respondents reported on the use of LLE as at least one of their routine sample preparation procedures (1).




Earlier, I wrote on the basics of LLE providing some of the theory (which will not be repeated here), examples of classical LLE including continuous and countercurrent chromatography, and some of newer techniques of the time (2). More recently, I covered approaches for miniaturization of classical LLE (3). In this installment, I will provide some practical hints to those who are considering the use or already are using LLE in hopes of improving your methodology.

Quick Review of LLE

LLE is performed using two immiscible liquids and soluble samples. LLE is useful for separating analytes from interferences by partitioning the sample between these two immiscible liquids or phases. Usually, one phase in LLE will be aqueous (often the denser or heavier phase) and the second phase is an organic solvent (usually the lighter phase). The more hydrophilic compounds prefer the polar aqueous phase, while more hydrophobic compounds will be found mainly in the organic solvent. Analytes extracted into the organic phase are recovered easily by evaporation of the solvent, while analytes extracted into the aqueous phase often can be injected directly onto a reversed-phase high performance liquid chromatography (HPLC) column. Obviously, when the analyte of interest in found in the aqueous phase, evaporation is a much slower process. However, the following discussion assumes that an analyte of interest is concentrated preferentially into the organic phase, but similar approaches are used when the analyte is extracted into an aqueous phase.


Figure 1
The generic flow diagram of Figure 1 summarizes the steps involved in a typical LLE separation. Because extraction is an equilibrium process with limited efficiency, significant amounts of the analyte can remain in both phases. Chemical equilibria involving changes in pH, ion-pairing, and complexation can be used to enhance analyte recovery and eliminate interferences.

In its classical and simplest form, LLE is performed conveniently in a separatory funnel where the two immiscible phases are added from the top and, after the extraction process, the heavier phase is drained out the bottom stopcock. However, LLE can be performed in other devices such as beakers, vials, centrifuge tubes, and graduated cylinders. In these cases, the liquids must be removed by some type of pipette and great care must be exercised not to disturb the interface layer. Otherwise, the extraction process may be incomplete.

123456
Next ť

ADVERTISEMENT

Rate this page
Your original vote has been tallied and is included in the ratings results.
View our top pages
 Average rating for this page is: 6
post a comment
Please complete the form below to post your comment.
Bold = Required
Email Address Your email address will NOT be published.
Display Name appears with your comment
City
State
Country
Remember me: YesNo
Comment read our privacy policy
Note: does not support HTML
All Comments submitted are subject to review, and may be delayed before posting. Comments will be posted at the discretion of the editor.
LCGC E-mail Newsletters
Select each newsletter you wish to subscribe for:
| Monthly
| Weekly
| Monthly
 Name:
 E-mail:
more info
Survey
What is your primary reason for attending analytica 2010?
Attending exhibition
Attending conference
Exhibiting at the show
A combination of all three
Other
Attending exhibition
0%
Attending conference
0%
Exhibiting at the show
0%
A combination of all three
0%
Other
0%
View Results
Source: The Application Notebook, 2/1/2009
Click here